The Variable Return-to-Sand Ratio
The term return-to-sand (RTS) ratio refers to the amount of sand returned to a sand reserve during the process of drilling a well or during the fracking process of extracting oil or gas. The RTS ratio is measured in numbers and the most common ratio used is 1:1. This means that one unit of sand is returned to the original drill site for every one unit of sand that was taken away. The ratio can be modified to suit the specific job, which can either increase or decrease the amount of sand returned to the drill site.
In certain scenarios, the RTS ratio has to be adjusted in order to ensure that there is enough sand to go around. For instance, when two or more drilling sites are located close together, it might be beneficial to adjust the ratio to ensure that there are no shortages to be had. Similarly, when a new reserve is being drilled, the RTS ratio might be increased in order to ensure that the sand is being replaced at an adequate rate.
The RTS ratio can also be used to increase the efficiency of a drilling process. By adjusting the ratio, it is possible to ensure that the sand is being used to its maximum potential. In this sense, the RTS can help to reduce the cost of the drilling operation, while ensuring that the desired outcome is achieved.
It should be noted that the RTS ratio is not a static value, and that its value can be adjusted to suit the purpose of the drillers. While the 1:1 ratio is the most common, it is possible to alter the ratio in order to increase the efficiency of the drilling operation.
The RTS ratio is an important tool when it comes to drilling in order to obtain oil and gas. By adjusting the ratio, it is possible to ensure that the drilling operation is being conducted as effectively as possible, while minimizing costs. Furthermore, it is possible to adjust the ratio in order to provide a good balance between efficiency and the amount of sand returned to the drill site.
