Symbol Four: Jog Control
This symbol is used for controlling the jog speed, starting and stopping the jog operation. Jog control also allows you to move the spindle or table in a chosen direction at variable speeds in order to get to a specific point. This symbol is typically found on the control panel of a CNC machining center and the lathe.
To use the jog control, you first need to select the direction that you would like to move the spindle or table. To do this, press the plus or minus buttons, depending on the direction you would like to move. Additionally, you can also adjust the speed at which the spindle or table moves with the plus/minus buttons.
When you are ready to start the jog operation, press the start button. This will cause the spindle or table to move slowly in the direction you have selected. When you want to stop the jog operation, press the stop button.
Jog control is used for positioning the spindle or table before a machining operation. It is important to know when to move the spindle or table too far and when to stop it in the right spot.
Symbol Four: Jog Control is a powerful tool for CNC machining centers and lathes. It allows the operator to precisely place the spindle or table in the right spot before beginning a machining operation. It is important to use caution when using the jog control. It is easy to move the spindle or table too far and cause an unnecessary delay or mistake in the machining process. The jog control symbol can help ensure that the spindle or table is placed in the right spot and help avoid unnecessary delays or mistakes.
