Manufacturing Technology of Submerged Nozzle for Thin Slab Continuous Casting

The Manufacture Technology of Water Inlet in Continuous Casting Billet In the production of steel bar, the continuous casting billet is mainly made of hot rolled steel. It is mainly used for the iron and steel smelting or production factory to further produce the hot rolled steel. For example, th......

The Manufacture Technology of Water Inlet in Continuous Casting Billet

In the production of steel bar, the continuous casting billet is mainly made of hot rolled steel. It is mainly used for the iron and steel smelting or production factory to further produce the hot rolled steel. For example, the process of automotive steel, bearing steel and aviation steel is mainly carried out under this condition. The production of continuous casting billet generally needs the technology of water inlet.

The water inlet technology is a kind of technology to reach the purpose of cooling the continuous casting billet. It is usually installed at the bottom of the continuous casting machine in the iron and steel factory. The installation of the water inlet requires high technical requirements. In the production process, if the water inlet is not properly installed, the quality of the billet production is not guaranteed, some defects or even irregularities in the production process may occur, which will have a great impact on the production of billet.

Therefore, the production of continuous casting billet needs the technology of water inlet. The equipment for water inlet includes many components. The main part includes flowmeter, gas exhauster, pressure reducing valve, fireproofing valve, rectification valve, pressure sensor, temperature sensor, flow code and so on. In the production process, these components need to be cooperated to form a whole water inlet assembly. The water inlet system should be installed after being loaded and unloaded, and the connection point of the system should be airtight. Before being installed, the capping head and sealing ring of the water inlet should be used to find the entire process of installation more eye-catching and accurate.

In the machining process of the water inlet system, the main parameter settings should be adjusted. The main parameters of the machining process include the flow rate, temperature and pressure. Therefore, the process parameters of the equipment should be adjusted before the production process, and the changes and accuracy of the parameter settings in the process should be strictly controlled.

The water inlet must be properly adjusted during production and checked frequently. According to the reaction of the equipment in the production process, the adjustment of the parameters should be made in a timely manner to ensure good performance of the equipment. As long as the operator can adjust these parameters during the production process, the water inlet technology can normally operate and ensure the good performance of the production process of the billet.

In a word, the water inlet technology is very important for the production of continuous casting billet. The production process of continuous casting billet needs this technology. Therefore, the operator needs to adjust and control the settings in the machining process correctly, and check the equipment frequently. As long as these requirements are met, it is helpful to ensure the good performance of the equipment and the production of the continuous casting billet.

Put Away Put Away
Expand Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
Composite steel
13/06/2023
two stage bidding
03/07/2023
slip
13/06/2023