Comparison Table of Abbreviation Codes for Plastics and Resins (Part 1)

Glossary 378 1068 Hazel

Plastic and Resin Abbreviation Reference Table (1) ACETAL: Acetal is a type of plastic composed of two methylene bridge linked to two oxygen bridges. This type of plastic is strong, rigid and has high dimensional stability. The abbreviation for Acetal is ACETAL. ABS: Acrylonitrile Butadiene Styr......

Plastic and Resin Abbreviation Reference Table (1)

ACETAL: Acetal is a type of plastic composed of two methylene bridge linked to two oxygen bridges. This type of plastic is strong, rigid and has high dimensional stability. The abbreviation for Acetal is ACETAL.

ABS: Acrylonitrile Butadiene Styrene (ABS) is a generic engineering plastic and the most widely used thermoplastic today. The abbreviation for ABS is ABS.

PVC: Polyvinyl Chloride (PVC) is a polymer made from vinyl chloride monomer, which is used in many applications. The abbreviation for PVC is PVC.

POLYCARBONATE: Polycarbonate is a strong, transparent thermoplastic material. It is available in a variety of forms and is used in a variety of applications. The abbreviation for Polycarbonate is PC or POLYCARB.

NYLON: Nylon is a tough, resilient, and hard-wearing thermoplastic polymer. Nylon is available in a variety of forms and is used in a variety of applications. The abbreviation for Nylon is NYLON.

ACRYLIC: Acrylic is a transparent thermoplastic with excellent clarity and strength. The abbreviation for Acrylic is ACRL or ACRYL.

POLYURETHANE: Polyurethane is a type of plastic polymer composed of an organic component, a polyester, and a cross-linking component that provides outstanding abrasion resistance and strength. The abbreviation for Polyurethane is PU or POLYURETHANE.

POLYETHYLENE: Polyethylene is a thermoplastic polymer composed of ethylene and other monomers. It is widely used in a variety of applications including packaging and insulation. The abbreviation for Polyethylene is PE or POLYETHYLENE.

POLYPROPYLENE: Polypropylene is a thermoplastic produced by polymerizing propylene. It is one of the most widely used plastics in the world and is used in a variety of applications. The abbreviation for Polypropylene is PP or POLYPROPYLENE.

POLYSTYRENE: Polystyrene is a straight-chain synthetic polymer of styrene monomers. It is used in a variety of applications including packaging, insulation, and food service. The abbreviation for Polystyrene is PS or POLYSTYRENE.

POLYSULFONE: Polysulfone is a transparent high-performance thermoplastic that exhibits a combination of strength, toughness, and heat resistance. It is available in a variety of forms and is used in a variety of applications. The abbreviation for Polysulfone is PSU or POLYSULFONE.

POLYVINYL: Polyvinyl is a synthetic plastic polymer made of ethylene and vinyl chloride. It is used in a variety of applications including automotive, construction, and medical. The abbreviation for Polyvinyl is PV or POLYVINYL.

POLYVINYLACETATE: Polyvinylacetate is a plastic produced by combining vinyl acetate with a synthetic polymer carrier. It is used in a variety of applications including adhesives and coatings. The abbreviation for Polyvinylacetate is PVA or POLYVINYLACETATE.

Thermoplastic elastomers (TPE): Thermoplastic elastomers are a type of plastic polymer that can be repeatedly softened and hardened when exposed to heat and pressure. They are used in a variety of applications including automotive and medical. The abbreviation for Thermoplastic elastomers is TPE.

Put Away Put Away

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
Composite steel
13/06/2023
engineering steel
13/06/2023