Preparation for Bearing Routine Inspections
To ensure proper functioning of a bearing, it is important to ensure its regular maintenance and routine inspections. Bearing inspections should not be taken lightly and should be pre-planned and executed according to the manufacturers recommendations.
Before the inspection starts, it is important to ensure that the bearing is well prepared. Common types of preparation include the removal of all objects that may hinder the inspection, like lubricating oil, dirt, and cover. In some cases, the bearing may need to be removed from its installation to inspect it properly. It is advisable to wear proper hand protection and protective clothing when handling the inspection.
The inspection should be conducted according to the manufacturers recommendations. The bearing should be visually inspected to identify any potential defects like cracks, dents, or rust. During the inspection, all defective or deficient areas should be noted in the inspection report.
The bearing should also be inspected for proper greasing and lubrication. If the bearing is lubricated, the levels should be within the recommendations of the manufacturer and the lubrication should be uniform over the entire bearing. Furthermore, the condition of the oil seals and O-rings should be checked and the lubrication used should be checked for proper viscosity.
Other points to check during the inspection include the mounting and alignment of the bearing, its condition and state as to whether it has recently been moved, and any repairs that have been made to the bearing. Any pending repairs to the bearing should also be noted in the report.
After the inspection, all findings should be documented in the inspection report. This report should include all findings, any repairs that need to be made, and any measures that should be taken to ensure the proper functioning of the bearing. The report should be kept on-site and referred to regularly to ensure that the bearing is well maintained.
Regular inspections of bearings are very important in order to maintain their performance and prevent unexpected repairs and downtime. Proper preparation prior to the inspections and timely repairs are essential in order to ensure the proper functioning of the bearing.
