Introduction
GDF anti-rust non-leaking standing kiln electrostatic dust collector is specially designed and developed by industrial advanced technology. With its sealing structure, it can avoid dust leakage in the dust removal process. The device realizes the process of dust collection, filtering and discharging at one time, and the dust removal effect is obvious. It is widely used in wood processing, wood furniture, wood door and window, wood floor.
Features
1. Smart, advanced design, exquisite electronic descaling technology.2. Removable filter, no need to replace, frequent use of cleaning agents, can reduce operating cost;
3. Wide range of application, suitable for industrial dust, wood dust and carbon black;
4. Precise electrostatic filtering technology, energy saving and efficient.
5. With the advantages of wide application scope and low energy consumption, it is widely used in various industrial fields.
Principle
The GDF anti-rust, non-leaking standing kiln electrostatic dust collector is based on the principle of electrostatic precipitation. Under the action of strong electric field, the particles carry the same charge and repel, so as to separate the particulate matter and the gas. The particles reach the filter element and settle, and the gas is discharged from the top.
The GDF anti-rust non-leaking standing kiln electrostatic dust collector uses electricity generated by a high-voltage electrode, which passes through the filter element and creates a powerful electric field, so that the particles carrying the same charge repel each other, which causes the particles to reach the filter element and settle. The air is then discharged from the top. As the electric field generates an attraction force between the particle and the filter element, the particle is adsorbed and adsorbed on the filter element, thus forming a very thin dust film.
Working Process
1. The dust-containing gas enters the gas pre-filter, and the particles larger than 5 μm are intercepted here;2. The partially intercepted gas is sent to the collection chamber through the exhaust fan, and the corresponding dust-lifting and discharging electrode is charged under the action of high voltage;3. The charged dust particles and gas form a downward flowing adsorption gravity field, so that a larger proportion of the dust particles in the gas enter the collection chamber and are intercepted by the electrodes;
4. During the interception of the dust particles by the electrodes, a strong electric field is generated in the collector. At this time, the dust particles enter the collector and the collision between the dust particles and the dust collection electrodes forms an electret effect;
5. The dust particles are repelled by the electrodes, which causes the dust particles to settle on the inner wall of the dust collecting chamber and adsorb to the dust collecting electrode, and finally the dust particles are collected on the filter element;
6. The purified gas is discharged from the top of the collector.
Conclusion
GDF anti-rust non-leaking standing kiln electrostatic dust collector has the advantages of wide application range, low energy consumption, high effect, stable performance and good dust removal effect. It is an ideal choice for dealing with dust and is widely used in wood processing, wood furniture, wood door and window, wood floor and other industries.
