GB 10868-89 Specifications for Power Station Temperature and Pressure Reduction Valves

1. Introduction The Power Station Temperature and Pressure Relief Valve (TPRV) is a device used to control and regulate the pressure and temperature of the power station system. It ensures safe operation of the power station systems by preventing over-pressure or over-temperature conditions from......

1. Introduction

The Power Station Temperature and Pressure Relief Valve (TPRV) is a device used to control and regulate the pressure and temperature of the power station system. It ensures safe operation of the power station systems by preventing over-pressure or over-temperature conditions from developing. Commonly used on boilers and power stations, the TPRV is constructed of cast iron or bronze. It is a non-return valve, meaning it allows gas or liquid to flow in only one direction. The valve is equipped with a spring tension release mechanism and is designed to close automatically if the predetermined pressure or temperature limit is exceeded.

2. Technical Specification

The technical specifications outlined in the GB 10868-89 standard regulate the performance characteristics of the TPRV. These include valve parameters such as the outlet pressure limit, temperature limit, material of construction, and internal diameter.

For a TPRV as designated by the GB 10868-89 standard, the maximum pressure limit is 10Mpa and the maximum temperature limit is 350℃. The valve body should be either cast iron or bronze, with the seat and disk being made of the same material. The internal diameter of the valve should be 25mm.

3. Application

The TPRV is used in power station systems to control and regulate the pressure and temperature. Its use is especially important in boilers where the pressure and temperature of the system can increase quickly and cause a hazardous situation if the pressure and temperature are not properly monitored. The TPRV effectively limits the pressure and temperature of the system to prevent any accidents or damage.

4. Advantages

The advantages of using a TPRV as opposed to other types of valves are mainly that it is easy to install and use, does not require maintenance, and is much more efficient than manual valves. Additionally, as it is a non-return valve, it offers superior protection by preventing liquid or gas from returning to the same side from which it left.

5. Conclusion

In conclusion, TPRVs as regulated by the GB 10868-89 standard are devices used to regulate and control the pressure and temperature of power station systems, mainly boilers. Their use ensures safe operation by preventing over-pressure or over-temperature conditions from developing. The main advantage of using a TPRV is that it is easy to install, requires no maintenance and is much more efficient than manual valves.

Put Away Put Away
Expand Expand

Commenta

Please surf the Internet in a civilized manner, speak rationally and abide by relevant regulations.
Featured Entries
low alloy steel
13/06/2023