Hot rolled products with a fine grained structural steel according to SEW 088/EN 10113/2-1993
Fine grained structural steel according to SEW 088/EN 10113/2-1993 covers steel products of uniform quality intended for pressure resistant weldable parts. Standard SEW 088/EN 10113/2-1993 is the specification of hot-rolled products with fine grain structure steel.
Chemical composition
Material number C-Number C Si Mn P S Al Cu N1 1.0973 0.04 0.22 0.70 0.025 0.015 0.033 0.04 N2 1.0977 0.08 0.17 0.90 0.025 0.015 0.030 -
According to the requirements of SEW 088/EN 10113/2-1993, the chemical composition of the provided fine grain structure steel must be checked by the manufacturer and indicated on the product test certificate.
Mechanical properties
The mechanical properties of fine grained structural steel according to SEW 088/EN 10113/2-1993 must also be checked by the manufacturer and indicated on the provided product test certificate. Under normal delivery conditions, this product must have a tensile strength of at least 370 N/mm2. Furthermore, it must have a yield point of at least 270 N/mm2, and the elongation must be at least 22%.
Weldability
The fine grained structural steel according to SEW 088/EN 10113/2-1993 is suitable for welding and has good weldability. Furthermore, it can be used in a variety of pressure resistant welding parts, such as pressure tanks and other pressure resistant parts.
Testing
When purchasing a product with fine grained structural steel according to SEW 088/EN 10113/2-1993, it is important to note that the manufacturer must check both the chemical composition and the mechanical properties of the steel. Furthermore, the manufacturer must provide a product test certificate with all relevant information. This product test certificate is crucial in ensuring that the steel product meets the necessary requirements of the SEW 088/EN 10113/2-1993 standard.
Conclusion
SEW 088/EN 10113/2-1993 is a standard for hot-rolled products with fine grained structural steel. In order to ensure that the material meets the necessary requirements, the manufacturer must check the chemical composition and mechanical properties as stated in the standard. Furthermore, the manufacturer must provide a product test certificate with all relevant information. As long as these requirements are met, the fine grained structural steel according to SEW 088/EN 10113/2-1993 is suitable for welding and has good weldability.