The operating procedures of JF1002 wax molding machine
Introduction
The JF1002 wax molding machine is widely used for the production of wax patterns for metal castings. It features simple operation and high production efficiency. The wax patterns produced can meet high mechanical and thermal requirements.
Positioning
The machine should be installed in an area with good ventilation and at a distance away from heat sources. The ambient temperature should be between 0 - 35, and the relative humidity should be lower than 80%, otherwise they will cause wax to be sticky and unable to form.
Safety means
1. The wax machine must be earthed reliably, and the ground wire should be connected to avoid electric shock.
2. The motor, regulating knob and various switches should be in good contact to prevent short circuit, electric shock and fire.
3. Check and keep the running parts of the wax machine lubricated.
Operation
1. Turn on the power and check if the wiring is correct before operating the machine.
2. Place the wax pattern molds on the machine base and make them lined up.
3. Adjust the temperature of the wax machine according to the requirements and wait until it is in the range of 35 to 40 degrees.
4. Pour the wax into the melting tank and slowly heat it up. When the wax holds its shape and is slightly viscous, it is ready to be released.
5. Open the pattern mold one by one and press the mechanical handle to release the wax patterns.
6. When the wax patterns have cooled, carefully take out the wax pattern from the mold.
7. Apply the finished wax pattern to the tree and wait for the next production step.
Maintenance
1. Clean the wax machine regularly, paying attention to the position of each part.
2. Check and adjust the gear and equipment regularly to ensure that the wax machine can operate normally.
3. Replace the lubricating oil periodically to reduce wear.
4. Replace the power switch and check the shell regularly to prevent electric shock and fire.
Conclusion
The above contents summarize the operating procedures of JF1002 wax molding machine. It is hoped that the operating steps can be strictly followed to ensure reliability and safety, and bring better work efficiencies.
