Installation of Non-ferrous Metal Plate Rolling Mill
Non-ferrous metal plate rolling mill is a high efficiency equipment for rolling of fine metal products. It is widely used for rolling copper, aluminium and other non-ferrous metal products. The installation of this machine is relatively easy. The following steps will be taken to finish the installation.
1. Site Preparation: The first step is to remove any objects that may obstruct the installation of the machine from the site. This would include imposing structures, any kind of rocks, soil piles and so on. Once the site is cleared and leveled, it is ready for the installation.
2. Unpacking and Moving: Careful unpacking of the machine is essential to ensure it reaches its destination intact. The machine should be placed onto a large pallet and the crate that the machine is packed in should be removed before moving. A forklift would be required to move the machine to the designated area.
3. Pre-assembly: All the parts of the non-ferrous metal plate rolling mill will be pre-assembled according to the instructions given in the manual. This is a safety consideration, as it will help to ensure that all the parts are in the correct position. All the necessary tools should be used for this process.
4. Grounding and Stress Relief: The metal plate rolling mill shall be well grounded by driving some ground stakes into the ground around the machine. This will help to prevent any electrical hazards from encountering the machine. The machine also needs to be stress relieved by vibrating its components. This helps to reduce the occurrence of vibrations when in use.
5. Installation of Jig Fixture: A jig fixture should be installed according to the instruction given in the manual. This will help to align the machine for accurate product requirements.
6. Final Alignment and Testing: After the machine has been properly assembled, the alignment should be checked using a laser alignment device. This will help to ensure that the machine is properly adjusted and ready for use. Following that, the machine should be tested according to the instruction given in the manual.
Installation of the non-ferrous metal plate rolling mill is relatively easy. If followed correctly, these steps should lead to a successful installation. Proper maintenance of the machine is important in order to ensure long-term and efficient functioning of the machine.
