Design of Intermediategauge Rolling Mill Workshop
The design of the intermediate gauge rolling mill workshop is to establish a workshop according to the standard technical requirements that can meet the production needs of intermediate gauge rolling mill. The workshop mainly includes workshop building, over-port bridge crane, floor crane and auxiliary equipment room.
The workshop building is steel-structured reinforced concrete frame structure. The production workshop is mostly single-story and the office is mainly double-story. There is a crane beam over the production workshop and part of the process equipment is equipped with bridge crane. The bridge crane and floor crane adopt the box girder structure, the crane running speed can reach 20~30m/min, and the medium-sized crane is equipped with a trolley. Auxiliary equipment room mainly stores and stores raw materials, spare parts, finished products, etc., respectively.
The length and width of the rolling mill workshop is determined according to the length and quantities of the rolling mill and auxiliary equipment, while the height of the workshop is mainly considered the size of the equipment and the position of the crane beam. The length of the workshop is generally determined according to the number and length of the rolling mill, and the width of the workshop is determined according to the auxiliary equipment. The height of the workshop is determined based on the width of the equipment and the position of the crane beam.
In the design of intermediate gauge rolling mill workshop, it is necessary to consider the problems caused by temperature, noise and dust in the production process. In order to reduce temperature and noise, the workshop should be carefully shielded and equipped with an appropriate ventilation device; as a noise protection system and a cooling system. In addition, ensure the rationality of all pipe routing, so as not to affect daily maintenance.
In conclusion, the design of the intermediate gauge rolling mill workshop must be based on the technical requirements and production requirements, considering all aspects such as construction structure, workshop size and environmental protection, so as to design the perfect intermediate gauge rolling mill workshop.
