Use and Maintenance Points of CNC Turret Punch Press Mould
CNC turret punch press moulds are an essential piece of equipment used to produce high-precision holes, slots, grooves, and other special geometric shapes on a variety of workpiece materials. CNC turret punch press moulds are typically composed of a die, die and a mechanical pressing arm operated by a computer numerical control (CNC) system. They are mainly used for processing sheet metals and can be used for single pieces or in production lines for higher outputs.
To ensure the safe and efficient use of CNC turret punch presses, it is important to understand and adhere to the equipments use and maintenance guidelines and requirements.
Pre-start Checks
Before starting the CNC turret punch press mould, it is important to check that all necessary safety guards and covers are in place. Wear protective gear such as hearing protectors, gloves, and safety shoes as required.
It is also important to ensure that all electrical systems are operational and no loose parts are present. Make sure that the lubrication systems are properly lubricated and the air hoses and water plumbing to the mould are in good condition.
Machine Operation
Make sure that all necessary tools and materials are in place and that the nest for the workpiece is correct. If the workpiece size is larger than the nest size, pinning may be necessary. Verify that the proper tool is installed in the machine and that the correct settings are made for the material being worked.
Start the machine by pressing the power switch. Keep all guards and covers in place at all times during the operation and do not start the machine until the safety guards are in place. Use the hand wheel to carefully bring the press arm down to the stop and then lower it further with the CNC control.
Run a test stroke on the material and ensure that the hole is accurately punched out by checking with a suitable gauge or measuring instrument. Adjust the settings as necessary until the desired result is achieved.
Once the workpiece is completely punched out, raise the press arm to the starting position and stop the machine. Make sure that the material is cleared and that the next sheet is ready to be loaded.
Maintenance
Daily maintenance on the CNC turret punch press mould includes checking that all tooling and accessories are in good working order and properly secured. Check for any loose wires and that the lubrication system is working properly.
Lubricate moving parts as necessary and make sure that all guards and covers are used at all times. Check the air pressure and make sure that the air filter is clean and in good condition. Replace tools as needed.
It is also important to perform regular inspections of the moulds electrical and mechanical components. The mechanical components should be lubricated and adjusted as needed. Tighten any loose electrical connections as necessary and make sure that both the programming and the operating systems are running smoothly.
Conclusion
Proper use and maintenance of the CNC turret punch press mould is essential to ensure the safe, efficient, and productive operation of the machine. It is important to adhere to the guidelines and instructions provided by the manufacturer to ensure the long-term safe and optimized operation of the mould. Regular inspections and maintenance checks should be conducted to ensure that all components are working properly and that the mould is in good working order. Following these guidelines will help to prolong the life of the mould, maximize its production output and minimize downtime.
