The old sand-cooling equipment is an important part of the power plants safety system. This equipment is designed to cool the hot sand before it is used in the power plant. In order to ensure that the old sand-cooling equipment runs safely and efficiently, the following technical parameters should be taken into consideration.
1. Temperature of the hot sand. It is recommended that the temperature of the hot sand should not exceed 60 degrees Celsius during the cooling process.
2. Flow rate of the sand. The flow rate of the sand should be regulated to ensure that the sand is adequately cooled.
3. Type of cooling system. The old sand-cooling equipment should be equipped with either a finned-tube or an air-cooled system.
4. Inlet control. The inlet of the cooling system should be controlled to ensure maximum cooling efficiency.
5. Outlet control. The outlet of the cooling system should be regulated to ensure optimal cooling.
6. Pressure drop. The pressure drop of the cooling system should be monitored to ensure optimal cooling efficiency.
7. Heat transfer. The heat transfer rate of the cooling system should be monitored to ensure optimal cooling capacity.
8. Maintenance. The old sand-cooling equipment should be regularly checked and maintained to ensure that it is operating correctly and safely.
9. Safety. The safety of the cooling system should be monitored on a regular basis.
By considering the above technical parameters, the old sand-cooling equipment can be operated safely and efficiently. It is important to use these parameters to ensure the safe operation of the old sand-cooling equipment and to ensure optimal performance.
