How to Make a Coal Gas Cabinet
Coal gas, also known as „town gas”, is an obsolete fuel typically used in the 19th century, that was created by converting coal into a gas state. Coal gas can be used to power a variety of appliances, including lamps, furnaces, and kitchen stoves. Creating a coal gas cabinet is an interesting project for anyone looking to experience the traditional usage of coal gas. Here is a guide on how to make a coal gas cabinet.
Step One: Obtain Materials
You will need a variety of materials in order to construct a coal gas cabinet. First, you need to obtain a suitable fuel container, such as a metal canister. You will also need a supply of coal, which should be in small pieces to facilitate easy burning. Additionally, you will need a source of wood and a few nails in order to construct the box-like structure of the gas cabinet.
Step Two: Create the Cabinet
Once you have obtained all of the necessary materials, it is time to start constructing the cabinet. Start by laying out the wood on the ground and outlining the size of the cabinet. Once the size has been marked, use the nails to start assembling the structure. When constructing the sides of the cabinet, make sure that the seams are properly sealed so that your cabinet is airtight. This will to help ensure that the coal gas does not escape.
Step Three: Add the Fuel
Once the cabinet has been constructed, it is time to add the fuel. Place the metal canister inside the cabinet and ensure that it is sealed and airtight. Then, fill the canister with the coal pieces and seal the lid shut.
Step Four: Construct the Gas Outlet
The next step is to construct the gas outlet, which will allow for the collection of the coal gas. To do this, you need to construct an opening in the top of the cabinet; this should be at least four inches in diameter. Once the opening has been created, place a pipe inside the cabinet and use it to direct the gas to a suitable storage container.
Step Five: Ignite the Coal
Finally, once your cabinet is completely constructed, it is time to ignite the coal. Use a piece of tinder to spark the coal and release the gas. It should take several minutes before the coal is completely ignited and the gas is flowing out of the cabinet.
Once the gas is flowing, you can use it to power your chosen appliance or store it for later use. Creating a coal gas cabinet is an interesting project for anyone looking to experience the traditional usage of coal gas. With the use of the right materials and some patience, you can easily make a coal gas cabinet of your own.
