GB/T 709-1988 covers the dimensions, shape and tolerances of hot-rolled steel plate, sheet and strip produced by the hot-rolling process.
1 Scope
This standard applies to hot-rolled flat steel products for direct cold forming (gee section 1.1.1).
It specifies the dimensions and shape, permissib......
The Difference in Allowable Deviations for Hot Rolling and Cold Rolling Thin Plates
Thin plates are extensively used in a variety of applications because they offer stability, strength and can be fabricated into objects with more precision than thicker plates. To ensure the desired characteristic......
Abstract
ASTM A606-97 is an endurance limit, high strength, low alloy steel. High strength steel alloys are designed for improved overall mechanical properties, including increased hardness and stiffness. This high strength, low alloy steel has proved to be highly durable in the most demanding en......
?
The Standard AS/NZS 1449/1.5-1991 Carbon Steels and Carbon Manganese Steels, Slab, Sheet, and Strip - Finished Analysis Tolerances specifies the allowable tolerances for the finished analysis of carbon steels and carbon-manganese steels slab, sheet and strip.
The standard covers the conditions ......
改写。
This document specifies the chemical composition and mechanical properties of carbon steel and carbon manganese steel plate, sheet and strip (hereinafter referred to as “steel plate and sheet”). It is applicable to steels conforming to Australian Standard AS 1449/1.5-1991 (Table 1).
Table......
The purpose of this article is to discuss the chemical compositions of stainless steel and heat-resistant steel thick plates, thin plates and steel strips as per Standards Australia AS 1449/2-1983.
The Standard AS 1449/2-1983 describes the chemical compositions of these thick plates, thin plates ......
来介绍这个标准
Overview of GB 1501/3-1990 Pressure Steel Thick Plate, Thin Plate and Strip Part 3: Specification for Heat and Corrosion Resistant Steel
GB 1501/3-1990 is a technical specification related to pressure steel thick plate, thin plate, and strip products. The standard was published by t......
EN10028-2 P265GH is a material grade and designation defined in EN10028-2 standard. It is a non-alloy steel and chrome-molybdenum steel intended for use in pressure vessels, boilers and heat exchangers. The material is used in various forms such as plates and bars, and is well suited for forming......
Introduction
This Standard specifies the technical requirements of carbon steel, low alloy steel and alloy steel plates for boilers and pressure vessels. The chemical composition limits of these steels are used to determine their strength, toughness, weldability and other properties. The material......
HOT-ROLLED CORROSION-RESISTANT, HEAT-RESISTANT AND THERMALLY STRESSED STEEL SHEETS
This national standard applies to corrosion-resistant, heat-resistant and thermally-stressed steel sheets with a mass fraction of carbon of 0.45% to 0.55%, manganese of 0.6% to 1.2%, phosphorus of 0.03%, sulfur of ......