Search results for keyword: tolerances
GB/T 9788-1988 Dimensions, shape, weight and allowable deviation of hot-rolled unequal angle steel
GB/T 9788-1988 Hot Rolled Unequal Angles: Dimensions, Shape, Mass and Permissible Deviations
This standard applies to hot rolled unequal angles for use in structural engineering.
The size tolerance for dimensions such as width (tolerance for the range of ± 0.4 to ± 5 mm) and length shall be i......
1083 
Sophie
Dimensions, shapes, weights and allowable deviations of hot-rolled steel sheets and strips (GB/T 709-2006)
Size, shape, weight and allowable deviation of hot rolled steel plate and steel strip
1. Introduction
The purpose of this GB/T 709-2006 is to regulate the size, shape, weight and allowable deviation of hot-rolled steel plate and steel strip. Steel plates and strips are essential components in ma......
GB/T912-1989 Carbon structural steel and low alloy structural steel hot rolled sheet and strip
GB/T912-1989 Hot-rolled carbon structure and low alloy steel plate and strip
GB/T912-1989 is a technical specification issued by Chinas National Standardization Management Committee specifically for hot-rolled carbon structure and low alloy steel plate and strip. It regulates the requirements, te......
ASTM A484M-1998 General requirements for stainless and heat-resistant steel bars, billets, and forgings
Abstract
This specification covers general requirements for wrought stainless steels and heat resisting steels in the form of bars, billets, blooms, and forgings for general requirements. The steel shall conform to chemical composition requirements, in which cost-effectiveness shall be considered......
Technical delivery conditions for welded round steel pipes of austenitic stainless steel with special requirements (DIN 17457-1985)
This standard sets out the technical requirements for the delivery of welded stainless steel tubes with special requirements made of austenitic stainless steel (DIN 17457-1985).
1 Scope
This Standard applies to stainless steel tubes made of austenitic stainless steel, referred to as welded tubes......
ASTM A484M-1998 Dimensional tolerances for stainless and heat-resistant steel bars, billets, and forgings
？
ASTM A484M-1998 Standard Specification for General Requirements for Stainless Steel and Heat-Resistant Steel Bars, Billets, and Forgings
This ASTM A484M-1998 standard covers general requirements for stainless steel and heat-resistant steel bars, billets and forgings. The requirements for materi......
ASTM A29/A29M-1993 Standard Grain Size of Hot-Worked and Cold-Worked Carbon and Alloy Steel Bars
Abstract
This article aims to discuss the practices on grain size measurements of ASTM A29/A29M-1993 hot-processed and cold-processed carbon and alloy steel bars. The procedures for grain size measurements are thoroughly discussed, beginning from the selection of specimens, followed by the sample......
JIS G4106—1979 Manganese alloy steel and manganese-chromium alloy steel manufacturing method, shape and size for mechanical structure
，JIS G4106—1979 establishes the manufacturing methods, shapes and dimensions of manganese alloy steel and manganese-chromium alloy steel for mechanical structures. Manganese alloy steel is steel alloyed with a variety of manganese and with other elements such as silicon, copper, and aluminium. Thi......
Curvature, weight and allowable deviation of waste heat treated steel bars (GB 13014-1991)
The bending diameter, weight and allowable deviation of heat-treated steel bars (GB 13014-1991)
In China, the bending diameter, weight and allowable deviation of heat-treated steel bars are stipulated by the national standard of GB 13014-1991.
1.Bending diameter
The bending diameter of heat-tre......
GB1591-1988 "Low Alloy Structural Steel"
Low Alloy Structural Steel GB1591-1988
Low alloy structural steel, also known as HSLA, is a type of steel alloyed with a small amount of elements such as nickel, chromium, and molybdenum that provide enhanced structural properties such as hardness and corrosion resistance. Low alloy steel can be ......
Popular Entries
- Spanish heat-resistant steel steel grade
- Faults caused by incorrect mixing ratio of gasoline and engine oil
- How lifts work
- overseas trade
- London Exchange Alternative Investment Market
- Zibo Fushan Mining Co., Ltd.
- Brinell/Rockwell hardness conversion table
- Zhangjiagang Rural Commercial Bank
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- thermodynamics thermodynamics
- re-election workshop design
- employee satisfaction
- Density of diamond
- Rationalized Global Planning Model
- digital wallet
Recent Updates
- continuous casting
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- overseas trade
- shipping
- Korea Xinsheng Shipping Co., Ltd. Shanghai Office
- Hamilton's Protectionist Trade Doctrine
- Rationalized Global Planning Model
- Heckscher-Ohlin model
- black market price
- buy each other
- principle of reciprocal treatment
- The unit that accepts entrusted customs declaration
- reciprocal tariff
- sliding tariff
- digital wallet
- horizontal trade
Trending Keywords
Copyright © 2016 - 2024 by metal-knowledge.com. All rights reserved