Search results for keyword: accordance
ASTM A484M-1998 General requirements for stainless and heat-resistant steel bars, billets, and forgings
Abstract
This specification covers general requirements for wrought stainless steels and heat resisting steels in the form of bars, billets, blooms, and forgings for general requirements. The steel shall conform to chemical composition requirements, in which cost-effectiveness shall be considered......
1093 
Sophia
Technical delivery conditions for welded round steel pipes of austenitic stainless steel with special requirements (DIN 17457-1985)
This standard sets out the technical requirements for the delivery of welded stainless steel tubes with special requirements made of austenitic stainless steel (DIN 17457-1985).
1 Scope
This Standard applies to stainless steel tubes made of austenitic stainless steel, referred to as welded tubes......
ASTM A484M-1998 Dimensional tolerances for stainless and heat-resistant steel bars, billets, and forgings
？
ASTM A484M-1998 Standard Specification for General Requirements for Stainless Steel and Heat-Resistant Steel Bars, Billets, and Forgings
This ASTM A484M-1998 standard covers general requirements for stainless steel and heat-resistant steel bars, billets and forgings. The requirements for materi......
ASTM A29/A29M-1993 Standard Grain Size of Hot-Worked and Cold-Worked Carbon and Alloy Steel Bars
Abstract
This article aims to discuss the practices on grain size measurements of ASTM A29/A29M-1993 hot-processed and cold-processed carbon and alloy steel bars. The procedures for grain size measurements are thoroughly discussed, beginning from the selection of specimens, followed by the sample......
ASTM A844/A844M-1993 General requirements for 9% nickel alloy steel plates produced by the direct quenching process for pressure vessels
ASTM A844/A844M-1993
This ASTM A844/A844M-1993 standard specifies the requirements for Grade 9% Nickel Steel plates used in pressure vessels. It applies to plates made by direct quenching and tempering process.
Grade 9% Nickel Steel is an age-hardening nickel-iron-chromium alloy. Nickel increas......
Mechanical properties and technological properties of waste heat treated steel bars (GB 13014-1991)
Mechanical and Process Performance of Quenching and Tempering Steel Reinforcing Bars (GB 13014-1991)
Introduction
Quenching and tempering is a common process applied to steel reinforcing bars (rebars). This process is used to increase the mechanical and process performance of the bars. The purpo......
Waste heat treatment steel bars for reinforced concrete (GB 13014-1991)
Heat Treatment of Steel Bar for Reinforced Concrete (GB 13014-1991)
The heat treatment of steel reinforcement for reinforced concrete structures is mainly to control the hardness and strength of steel, reduce the overall weight, and improve the formability, weldability and workability of steel. G......
GB/T1591—1994 "Low Alloy High Strength Structural Steel" (Current Standard)
GB/T1591-1994 High Strength Low Alloy Structural Steel Standard
The GB/T1591-1994 high strength low alloy structural steel standard is a national standard in China which specifies the requirements for the chemical composition, mechanical properties and general technical requirements for the product......
GB/T 11253-1989 Carbon structural steel and low alloy structural steel cold rolled sheet and strip
版本
Cold-rolled sheet steel and steel strips made of carbon structural steel and low-alloy structural steel are used in a wide range of applications. GB/T 11253-1989 is the national standard for the production and quality assurance of these products. This article provides a detailed description of......
Mechanical properties, process properties and surface quality of cold-rolled ribbed steel bars (GB 13788-2000)
Abstract
This paper evaluates the cold-rolled ribbed steel bar mechanical performance, process performance and surface quality by comparing with GB13788-2000 and other standards. Cold-rolled ribbed steel bar is widely used in reinforced concrete and other building structures. In this paper, a ser......
Popular Entries
- Spanish heat-resistant steel steel grade
- Faults caused by incorrect mixing ratio of gasoline and engine oil
- How lifts work
- overseas trade
- London Exchange Alternative Investment Market
- Zibo Fushan Mining Co., Ltd.
- Brinell/Rockwell hardness conversion table
- Zhangjiagang Rural Commercial Bank
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- thermodynamics thermodynamics
- re-election workshop design
- employee satisfaction
- Density of diamond
- Rationalized Global Planning Model
- digital wallet
Recent Updates
- continuous casting
- ГOCT 5949-1975 Specifications for corrosion-resistant, heat-resistant and heat-strength steel bars and cold-worked products
- overseas trade
- shipping
- Korea Xinsheng Shipping Co., Ltd. Shanghai Office
- Hamilton's Protectionist Trade Doctrine
- Rationalized Global Planning Model
- Heckscher-Ohlin model
- black market price
- buy each other
- principle of reciprocal treatment
- The unit that accepts entrusted customs declaration
- reciprocal tariff
- sliding tariff
- digital wallet
- horizontal trade
Trending Keywords
Copyright © 2016 - 2024 by metal-knowledge.com. All rights reserved