Installation of Cold Roll Forming Machine
Cold roll forming machine, commonly known as cold bending machine or forming machine, is a kind of industrial special equipment used for continuous forming of sheet metal, which is an indispensable mechanical equipment in all walks of life. The basic roll forming process of the cold roll forming machine mainly includes sheet cutting, sheet leveling, sheet forming, sheet punching, sheet welding and other processes. This article mainly introduces the installation of cold roll forming machine.
Before installation, the operator should accurately check the power line of the equipment and check the electricity for installation. Firstly, check the power supply voltage and transmission frequency, and ensure that these two indicators are consistent with the power parameter requirements of the equipment and related equipment. Secondly, use a multimeter to check the grounding line of the equipment, and ensure that the ground line is connected with metal objects, or can use metal or grounding rods to ensure the ground line.
After the power is installed, the operator should check the ground connection device to ensure that the metal chassis and the grounding device are in good contact. And then, the operator must check whether the straightening frame, rolling frame and feeding frame are in place and fix them with nuts and bolts. After inspection, the motor connection: use bolts to fix the motor on the base, then connect the motor cable to the motor according to the motor wiring diagram. After the motor connection is completed, the following connection of the sprocket rims and chains needs to be done.
Before operate the cold roll forming machine, it is necessary to make well lubrication on the drive mechanism and correct operation of the machine. The lubrication intensity should be moderate, and the lubricating parts should be clean and tidy. It is forbidden to start the machine without lubrication. In addition, the operator should be familiar with the operation process. After the machine is started, the normal speed should be played, and it is strictly forbidden to add too much friction force in the middle of the process to avoid machine failure and other equipment damage.
In conclusion, the installation process of cold roll forming machine is mainly the connection and installation of related electrical appliances and the connection and installation of its various parts, as well as its lubrication and operation. For related personnel, they must strictly abide by the safety regulations when carrying out the installation process, so as to ensure the safe use of the machine and extend its service life.
