00Cr12Ni8Cu2TiNb (Custom 455) mechanical properties at room temperature

Mechanical Properties of Custom 455 at Room Temperature

Custom 455 is a martensitic stainless steel that offers a combination of corrosion resistance, wear resistance, and strength. This alloy is composed of iron, chromium, nickel, cobalt, molybdenum, and titanium and is intended for use in applications that require a highly corrosion-resistant and wear-resistant material. Custom 455 also offers excellent formability and good weldability, making it an ideal choice for many different applications.

The mechanical properties of Custom 455 at room temperature are presented in the following table. The mechanical properties of this alloy are dependent on the amount of cold working and post-work heat treatment applied to the material. As a result, these properties may vary somewhat depending on the manufacturing process and the particular alloy composition.

Tensile Strength (ksi): 164-192

Yield Strength (ksi): 136-158

Elongation (% in 2 in): 10-20

Hardness (Rockwell C): 30-45 HRC

Reduction in Area (%): 35-50

Compressive Strength (ksi): 25-35

Impact Test (Izod or Charpy): Not available

Custom 455 is commonly used in applications where high strength and corrosion resistance are essential. This alloy is especially suitable for use in applications that require toughness and wear-resistance, such as turbine blades, fasteners, springs, and valves. It is also commonly used in paper mill and petroleum refining equipment, marine components, and cutting tools.

The alloy’s excellent corrosion resistance is related to its high chromium and molybdenum content and the formation of passivating protective layers on the surface of the material. Custom 455 is resistant to most corrosive agents and holds up well in marine atmospheres.

Custom 455 is a cost-effective choice for many applications and is considered to be a low-cost alternative to several higher-priced stainless steels. This alloy can be easily fabricated using conventional machining processes and welding techniques.

Custom 455 offers a wide range of mechanical properties, making it suitable for a variety of applications. With its combination of corrosion resistance, wear resistance, and strength, Custom 455 is an ideal choice for applications that require material performance in extreme environments or conditions.

Custom 455 stainless steel is a martensitic stainless steel, providing high strength and good ductility combined with corrosion resistance and ease of heat treatment. It is used mainly in the form of bars and components in a range of industries including aerospace, automotive, agricultural and chemical processing.

Custom 455 is a martensitic stainless steel designed for superior machinability and mechanical properties. It has very good corrosion resistance, especially in a corrosive environment. It has high strength and good ductility combined with corrosion resistance, making it suitable for a range of industries and applications.

The mechanical properties of Custom 455 at room temperature are as follows: the ultimate tensile strength is about 1150 MPa, the yield strength is about 1040 MPa, the elongation is about 8% and the hardness is about 32 HRC. The toughness of Custom 455 is excellent and it shows good resistance to wear. It is not very easy to weld because of its hardenability.

Custom 455 stainless steel is also an excellent material for hot forming due to its combination of strength, ductility and corrosion resistance. This steel can be machined easily and is can be surface treated with a wide range of finishes.

Custom 455 has been used in agricultural, automotive, aerospace and chemical processing industries. It provides great performance in a range of applications including pump parts, valve components, engine parts, turbine blades and other components used in these industries.

In conclusion, Custom 455 stainless steel is a martensitic stainless steel designed for superior machinability and mechanical properties at room temperature. It has good corrosion resistance and high strength combined with good ductility. It is used in a range of industries, including agriculture, automotive, aerospace and chemical processing for parts such as valves, pumps and engine components.