Analysis of the Use of Dust Extraction Device in Iron Casting Production Line
The dust extraction device is an important part of the iron casting production line. It is mainly used to discharge dust during the production process and protect the clean environment of the production site. At present, the dust extraction device of the production line of our factory has been in use for a long time, and its operational status needs to be studied and analyzed.
First of all, the dust extraction device in our production line can effectively start without failure. According to the cleaning and maintenance inspection of the equipment, the operating state of the equipment is stable. The production process is stable and the performance is good. Generally speaking, the dust generated during the production process can be completely discharged in time, so as to maintain the good clean environment of the production line.
Second, the dust extraction device in our production line has received a certain degree of wear and tear. During the production process, it has to deal with high temperature air for a long time. Consequently, the dust extraction device has been subject to heat aging, and some of its components have worn out to varying degrees, resulting in the decrease of its extraction efficiency. Therefore, the operation of the dust extraction device should be standardized, and prevention should be taken at all times to reduce the wear and tear of the equipment, so as to ensure the normal operation of the dust extraction device.
Third, the dust extraction device in our production line needs to be regularly cleaned and lubricated. In the long-term production process, the dust extraction device is prone to accumulate dust, and its air tightness is easy to be affected, thus affecting the discharging effect and air tightness of the equipment. Therefore, the cleaning, maintenance and lubrication of the equipment should be worked on regularly to ensure that its discharging effect is up to par.
Finally, in order to improve the production efficiency of the production line, the components that have been worn out need to be replaced in time, so that the dust extraction device can be used normally and the production efficiency can be ensured.
In short, the dust extraction device in our production line has been in use for a long time, and its operation status needs to be studied. It can start smoothly, and its discharging effect is also pretty good. However, it has received certain antagonism due to the use for a long period of time, and some of its components have worn out. Moreover, it also needs to be regularly cleaned and lubricated and the worn-out components need to be replaced in order to make sure it can work properly.
